Then make your existing OpenTherm thermostat smart with Adam. This allows you to easily create schedules and remotely control your thermostat. And in combination with a maintenance contract, your installer can monitor the status of your heating system. That way you will never be out in the cold again.

With Lisa, you’re not dependent on your smartphone or tablet. You can measure the temperature per zone and set it manually. The surrounding Tom radiator valves take care of the rest.

You need Tom. It means you no longer need to set the whole house at the same temperature, and you can easily set the temperature you want for a specific room. Soon, Adam will also support this product.

With Floor you no longer have to arrange the entire house at one temperature and you can easily set the desired temperature for a specific room. This can be done according to schedule, or manually via the Plugwise Home app or with Lisa.

Measure the energy consumption per device with the Plugwise Plug. The Plug can switch electrical devices, measures their energy usage and communicate this to other Zigbee Home Automation products, such as a gateway.

Complete insight into the energy consumption in one app. With the app you always have insight and control. Discover where the energy in your house goes, so you can start saving.

Then make your existing OpenTherm thermostat smart with Adam. This allows you to easily create schedules and remotely control your thermostat. And in combination with a maintenance contract, your installer can monitor the status of your heating system. That way you will never be out in the cold again.

Anna is a smart thermostat. She controls the temperature and thus your comfort in your own home. As long as you have internet access, you can operate her from your smartphone or tablet from anywhere in the world.

Easily cover remaining marks caused by your old thermostat with the Anna wall plate.

With CoolDing you can operate your infrared devices remotely, at any time, wherever you are. CoolDing is the universal remote control for all your infrared equipment.

With the Smile P1 you get an up-to-date insight into your energy consumption and costs. Both electricity and gas usage are revealed in the Plugwise app. You will see exactly when you used energy and how much, and what it costs.

Operate your TV or air-conditioner with the CoolDing app. Set a timer, or operate your infrared-controlled equipment remotely. Ideal for turning off your air-conditioner if you forgot to do this when leaving your house.

Complete insight into your energy consumption in one app. See the current electricity consumption and what it will cost you. And the user-friendly interface makes setting timers super easy.

The Start Source 3.0 package is for everyone who wants to begin saving energy at home. The app gives you an up-to-date view of the energy consumption of the connected devices, both inside and outside the home.

The Start Solar-package is ideal for measuring the yield from your solar panels. The app gives you up-to-date insight into the energy production of the connected devices, both inside and outside the home.

Do you want to change from Source to the Plugwise app? Then the Stretch 3.0 is the way to go. Simply put the Stick in the Stretch 3.0 and you can start using the app.

You place the Circle between the device and the wall socket. You can measure the energy consumption with the Circle, and you can switch it on or off remotely with one click of the button or using a timer.

Expand your Start Source/Stretch 3.0 package quickly and easily with 5 extra Circles. This gives you new insights into 5 extra devices.

The Scan is a wireless motion sensor which ensures that unnecessary lights will never again be left on. Add the Scan to your system and switch off the lighting on the basis of movement or light.

The Sense is a wireless temperature and humidity meter. Add the Sense to your system and measure the current temperature and humidity in the room.

The Stealth is an embedded module with which you can measure the energy consumption of connected lighting or devices. You can also switch the lighting or devices on or off remotely with a click of the button or using a timer.

The Stealth M is an embedded module with which you can measure the energy consumption of connected lighting or devices. The Stealth M can only measure the energy consumption and cannot be used as a switch. Among other things it’s ideal for measuring the yield from your solar panels.

The Switch is a wireless switch with which a device or a group of devices can be turned on or off. Add the Switch to your system without having to lay any cables for this.

Compleet inzicht in je energieverbruik in één app. Schakel je apparaten aan- of uit, zowel binnen als buitenshuis. En de gebruiksvriendelijke interface maakt het instellen van tijdschema’s supermakkelijk.

Source is the software program with which you can operate the Plugwise system through your computer, and where you can view your energy consumption. Switch equipment on or off directly, set a timer or control devices per group or area.