Shopping cart

Your shopping cart is empty

Continue shopping >

Zone control

Set the temperature per each room. In that way you can comfortably heat up the rooms you are using and save energy in the rooms that you do not use. And good to know, you can always expand.

De Plugwise Home Automation-producten communiceren volgens de open Zigbee-standaard "Home Automation 1.2". Vooralsnog worden Plugwise HA-producten aangestuurd door Home Automation Gateways, zoals Homey en Smart Life. Binnenkort zal er een update plaatsvinden waardoorje met de Plugwise Adam je HA 1.2-producten kunt aansturen.

Plugwise Home Set

The Plugwise Home set is the way to start with Plugwise zone heating. With Plugwise zone heating you can heat at the right temperature, at the right time, in the right room.


Adam HA

Then make your existing OpenTherm thermostat smart with Adam. This allows you to easily create schedules and remotely control your thermostat. And in combination with a maintenance contract, your installer can monitor the status of your heating system. That way you will never be out in the cold again.



With Lisa, you’re not dependent on your smartphone or tablet. You can measure the temperature per zone and set it manually. The surrounding Tom radiator valves take care of the rest.



Koen is the economical solution if you want to install zone heating on underfloor heating distributors. Koen is a multiple motor control, with 1 to 5 motors that can be opened or closed, for connection to the floor heating system valves.



You need Tom. It means you no longer need to set the whole house at the same temperature, and you can easily set the temperature you want for a specific room. Soon, Adam will also support this product.



With Floor you no longer have to arrange the entire house at one temperature and you can easily set the desired temperature for a specific room. This can be done according to schedule, or manually via the Plugwise Home app or with Lisa.



Measure the energy consumption per device with the Plugwise Plug. The Plug can switch electrical devices, measures their energy usage and communicate this to other Zigbee Home Automation products, such as a gateway.



Do you wish to have a stand alone product to read out your smart meter or do you want your control your infrared equipment? This is possible! In addition to our extensive Plugwise system, you can use the Smile P1 to read out, in real time, the energy and gas consumption or with CoolDing, operate your infrared equipment.


Anna is a smart thermostat. She controls the temperature and thus your comfort in your own home. As long as you have internet access, you can operate her from your smartphone or tablet from anywhere in the world.


Anna wallplate

Easily cover remaining marks caused by your old thermostat with the Anna wall plate.


Smile P1

With the Smile P1 you get an up-to-date insight into your energy consumption and costs. Both electricity and gas usage are revealed in the Plugwise app. You will see exactly when you used energy and how much, and what it costs.


CoolDing app

Operate your TV or air-conditioner with the CoolDing app. Set a timer, or operate your infrared-controlled equipment remotely. Ideal for turning off your air-conditioner if you forgot to do this when leaving your house.

Free Download

Plugwise app

Complete insight into your energy consumption in one app. See the current electricity consumption and what it will cost you. And the user-friendly interface makes setting timers super easy.

Free Download

Plugwise HNS

The Plugwise system consists of various components that work together. Do you want to start measuring the energy consumption per device and remote switching, then choose a Home package. You can easily expand the Home packages later with loose Plugwise Zigbee product.

Start Stretch 3.0

The Start Source 3.0 package is for everyone who wants to begin saving energy at home. The app gives you an up-to-date view of the energy consumption of the connected devices, both inside and outside the home.


Start Solar

The Start Solar-package is ideal for measuring the yield from your solar panels. The app gives you up-to-date insight into the energy production of the connected devices, both inside and outside the home.


Stretch 3.0

Do you want to change from Source to the Plugwise app? Then the Stretch 3.0 is the way to go. Simply put the Stick in the Stretch 3.0 and you can start using the app.



You place the Circle between the device and the wall socket. You can measure the energy consumption with the Circle, and you can switch it on or off remotely with one click of the button or using a timer.



Expand your Start Source/Stretch 3.0 package quickly and easily with 5 extra Circles. This gives you new insights into 5 extra devices.



The Scan is a wireless motion sensor which ensures that unnecessary lights will never again be left on. Add the Scan to your system and switch off the lighting on the basis of movement or light.



The Sense is a wireless temperature and humidity meter. Add the Sense to your system and measure the current temperature and humidity in the room.



The Stealth is an embedded module with which you can measure the energy consumption of connected lighting or devices. You can also switch the lighting or devices on or off remotely with a click of the button or using a timer.


Stealth M

The Stealth M is an embedded module with which you can measure the energy consumption of connected lighting or devices. The Stealth M can only measure the energy consumption and cannot be used as a switch. Among other things it’s ideal for measuring the yield from your solar panels.



The Switch is a wireless switch with which a device or a group of devices can be turned on or off. Add the Switch to your system without having to lay any cables for this.


Plugwise app

Compleet inzicht in je energieverbruik in één app. Schakel je apparaten aan- of uit, zowel binnen als buitenshuis. En de gebruiksvriendelijke interface maakt het instellen van tijdschema’s supermakkelijk.

Free Download


Source is the software program with which you can operate the Plugwise system through your computer, and where you can view your energy consumption. Switch equipment on or off directly, set a timer or control devices per group or area.

Free Download