Configure zone control system

Call for personal advice 088 243 3002

0,00

1. Gateway
2. Living room thermostat
3. Thermostats for other zones
4. Heating
5: Electric switching
6: Features & Accessories

1. Gateway

Adam HA is the gateway and thus the basis of the system that controls everything. Do you need a Tom radiator valve and Lisa thermostat? Then choose the affordable Starter package. Otherwise, only choose the Adam HA.

2. Living room thermostat

If you already have an OpenTherm thermostat in your (living) room, you can continue to use it and connect it to the Adam. Such as Anna (smart) thermostat, or any other OpenTherm thermostat. The Adam works with 99% * of existing OpenTherm thermostats. You can of course also use the wireless Lisa or Jip and not use the OpenTherm thermostat connection of the Adam.
* Not suitable: Google Nest, Honeywell wireless thermostats

3. Thermostats for other zones

Choose thermostats for all other zones, for example the bedroom or study. With Lisa you can see the measured and set temperature and you can also adjust it. Jip measures the temperature and is almost invisible. Jip has no display and can only be operated with the Plugwise Home app.

4. Heating

To be able to control each zone, you need control of the radiators, convectors and/or underfloor heating.

  • Give all radiators in the rooms that are added to the zone control a Tom radiator valve. Enter this number below with the number of Tom's.
  • Look at each underfloor heating manifold to see how many loops go in the floor and how many go to the same zone. Each loop needs a Floor or Koen. For example, are there four loops going to the living room? Then choose a Koen-4, which is suitable for four loops at the same time and is more affordable than 4x Floor. Is there one loop going to the bedroom? Then choose a Floor for that zone.

5: Electric switching

Adam can control a plug based on a heat demand. Do you have a circulation pump for your underfloor heating? Adam can switch it off if there is no heat demand from one of the linked zones. You can also switch an infrared panel, electric radiator or any other device with a plug based on a heat demand. You can also use a plug to switch your lighting or other devices. This can also be done on the basis of a circuit diagram.

You have now put together your zone control system! Click the Add to cart button below to immediately put all products in your shopping cart.
Note: Adding multiple products at the same time may take a little longer.

    Configure zone control system0,00
    1. Gateway
    Choose gateway: -
    2. Living room thermostat
    Wired living room thermostat: -
    Wireless living room thermostat: -
    3. Thermostats for other zones
    Choose thermostats other zones: -
    4. Heating
    Type of heating: -
    Radiators -
    Choose the amount of Tom's: -
    Underfloor heating -
    Choose underfloor heating control: -
    5: Electric switching
    Choose plug: -
    6: Features & Accessories
    Choose features: -
    Choose accessories: -
    Subtotal
    • Free shipping from €50 (NL)
    • Ordered before 12:00 on working days, delivered tomorrow
    • 2 weeks to change your mind