Features
What is it?
Do you have a system that supports cooling? Then you can not only heat smartly with Plugwise, but also cool comfortably. Ideal for the summer. Set the temperature per room with Adam and only cool in the room where it is needed. Brand and system independent!
How does it work then?
If you want your home to be cooled, that’s your choice. With Adam, you then set the Plugwise regulation to “Cooling”. With Anna, you can also turn on cooling through the thermostat by touching the top for 5 seconds.
From that moment on, your house/zone will be regulated by Plugwise on the basis of a cooling demand. With Adam even cooling per zone becomes possible. Set the temperature lower than the measured temperature so that cooling will take place. Of course you also have to set your heat source to cooling if this is not yet automatic. This is often a manual action on the heat pump or district heating.
Enter an ID
Enter your Adam or Anna ID to purchase this product. The ID consists of 8 letters and is located on the bottom of the gateway. You can also find the ID in the app.
Cooling with Adam
If your ‘heat source’ also has a cooling function, Adam can handle that. which heat sources have this for example? Almost all heat pumps also support cooling, which means that Adam can be used to cool each room. But also district heating systems sometimes have the option of cooling. Whatever system you have, cooling can be done together with the Plugwise zone control system.
Main regulation
As the main regulation, Adam can control cooling via on/off with any system or via OpenTherm with heat pumps that support OpenTherm*.
Uncontrolled heating source
As an after-control, Adam can cool with any system. Adam is not connected to the heat/cold source.
Cooling with Anna
Cooling with just an Anna can be done with the Techneco Elga, Thercon Thermastage heat pumps and other heat pumps that support OpenTherm*. The software between these two heat pumps and Anna is coordinated in such a way that automatic cooling is possible. Do you use Anna with Adam? Then you can always cool.
Supported systems
Cooling with Adam and Anna is possible in the following systems.
| Heat source | Adam | Anna |
|---|---|---|
| Techneco Elga |
|
|
| Remeha Elga Ace* |
|
|
| Thercon Thermastage R32, Thermastage R410A |
|
|
| Triple Solar |
|
|
| Heat pumps – OpenTherm* |
|
|
| Heat pumps – On/Off |
|
|
| District heating |
|
|
* Cooling works with the OpenTherm heat pumps Techneco Elga, Thercon Thermastage and Triple Solar. Other OpenTherm heat pumps should work in principle but have not been tested. It may not work completely.
