Features
What is it?
This Relay Box is suitable for heat pumps and other systems that have a heating contact and a cooling contact that are 0-250V and 0-16A.
When Adam has a demand, Adam’s heat source contact will close. The plug then determines whether this demand is for heating or cooling. When there is a heat demand, the heat contact of the Relay box will eventually close. When cooling, the cooling contact of the Relay box will eventually close. If there is no heat or cooling demand then both contacts are open.
Note, does your heat pump have a demand contact and a potential-free heating/cooling contact? Then only use a plug with a 230V relay box. Connect the Relay Box 230V plug to the heating/cooling contact and set it as device type cooling contact and connect Adam to the potential-free demand contact.
Contents
- 1x Relay box with cables up to 1m
- 1x Relay box diagram
What do you need?
- 1x Adam HA
- 1x Thermostat
- 1x Plug / Aqara Plug
- 2x Free sockets
- 1x Cool feature
Enter an ID
Do you also choose the Cool feature? Then enter the ID of your Adam HA if you already have one. The ID consists of 8 letters and is located on the bottom of the gateway. You can also find the ID in the app.
